| 規格No. |
名 称 |
| ISO 53 |
Cylindrical gears for general and heavy engineering - Standard basic rack tooth profile |
| ISO 54 |
Cylindrical gears for general engineering and for heavy engineering - Modules |
| ISO 677 |
Straight bevel gears for general engineering and heavy engineering - Basic rack |
| ISO 678 |
Straight bevel gears for general engineering and heavy engineering - Modules and diametral piches |
| ISO 701 |
International gear notation - Symbols for
geometrical data |
| ISO 1122-1 |
Vocabulary of gear terms - Part 1: Definitions related to geometry |
| ISO 1122-2 |
Vocabulary of gear terms - Part 2: Definitions related to worm gear geometry |
| ISO 1328-1 |
Cylindrical gears - ISO system of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth |
| ISO 1328-2 |
Cylindrical gears - ISO system of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
| ISO 1340 |
Cylindrical gears - Information to be given to the manufacturer by the purchaser in order to obtain the gear required |
| ISO 1341 |
Straight bevel gears - Information to be given to the manufacturer by the purchaser in order to obtain the gear required |
| ISO 2490 |
Single-start solid (monobloc) gear hobs with tenon drive or axial keyway, 1 to 40 module - Nominal dimensions |
| ISO 4468 |
Gear hobs - Single start - Accuracy requirements |
| ISO 6336-1 |
Calculation of load capacity of spur and helical gears - Part 1: Basic principles, Introduction and general influence factors |
| ISO 6336-2 |
Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting). |
| ISO 6336-3 |
Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength |
| DIS 6336-5 |
Calculation of load capacity of spur and helical gears - Part 5: strength and quality of materials |
| ISO 8579-1 |
Acceptance code for gears - Part 1: Test code of airborne sound |
| ISO 8579-2 |
Acceptance code for gears - Part 2: Determination of mechanical vibrations of gear units during acceptance testing |
| ISO 9083 |
Calculation of load capacity of spur and helical gears - Application to marine gears |
| ISO 10300-1 |
Calculation of load capacity of bevel gears - Part 1: Introduction and general influence factors |
| ISO 10300-2 |
Calculation of load capacity of bevel gears - Part 2: Calculation of surface durability (pitting) |
| ISO 10300-3 |
Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength |
| ISO 10347 |
Worm gears - Geometry of worms - Name plates for worm gear units, center distance, information to be supplied to gear
manufacturer by the purchaser |
| ISO 10825 |
Gears - Wear and damage to gear teeth - Terminology |
| ISO 13691 |
Petroleum and natural gas industries - High-speed special-purpose gear units |
| ISO 14104 |
Gears - Surface temper etch inspection after grinding |
| ISO 14635-1 |
Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils |
| DIS 14635-2 |
Gears - FZG test procedures - Part 2: FZG step load test A10/16,6R/120 |
| FDIS 18653 |
Gears - Evaluation of instruments for the measurement of gears |
| TR 4467 |
Addendum modification of the teeth of cylindrical gears for speed-reducing and speed-increasing gear pairs |
| TR 10064-1 |
Cylindrical gears - Code of inspection practice. Part 1: Inspection of corresponding flanks of gear teeth |
| TR 10064-2 |
Cylindrical gears-Code of inspection practice-Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| TR 10064-3 |
Cylindrical gears-Code of inspection practice-Part 3: Recommendations relative to gear blanks, shaft
center distance and parallelism of axes |
| TR 10064-4 |
Cylindrical gears- Code of inspection practice. Part 4: Recommendations relative to surface texture and tooth contact pattern checking |
| DTR 10064-5 |
Cylindrical gears- Code of inspection practice. Part 5: Recommendations relative to evaluation of gear measaring instruments |
| TR 10495 |
Cylindrical gears - calculation of service life under variable loads - Conditions for cylindrical gears in accordance with ISO6336 |
| TR 10828 |
Worm gears - Geometry of worm profiles |
| TR 13593 |
Enclosed gear drives for industrial applications |
| TR 13989-1 |
Calculation of scuffing load capacity of cylindrical,bevel
and hypoid gears Part 1: Flash temperature method |
| TR 13989-2 |
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Part 2: Integral temperature method |
| TR 14179-1 |
Gears - Thermal capacity - Part 1: Rating gear drives with
thermal equilibrium at 95℃ sumptemperature |
| TR 14179-2 |
Gears - Thermal capacity Part 2: Thermal load-carrying capacity |
