一般社団法人 日本歯車工業会

header_login

歯車関連規格

  1. 歯車関係JIS規格
  2. 歯車関係ISO規格

JGMA発行物

歯車関係JIS規格

ご購入・お問い合わせ先:(一財)日本規格協会

JIS一覧

規格番号 名  称
JIS B 0003: 2012 歯車製図
JIS B 0102-1: 2013 歯車用語-第1部:幾何形状に関する定義
JIS B 0102-2: 2013 歯車用語-第2部:ウォームギヤの幾何形状に関する定義
JIS B 0121: 2012 歯車記号−幾何学的データの記号
JIS B 0160: 2015 歯車−歯面の摩耗及び損傷−用語
JIS B 0174: 1991 歯切工具用語
JIS B 1453: 1988 歯車形軸継手
JIS B 1701-1: 2012 円筒歯車−インボリュート歯車歯形 第1部 標準基準ラック歯形
JIS B 1701-2: 1999 円筒歯車−インボリュート歯車歯形 第2部 モジュール
JIS B 1702-1: 1998 円筒歯車−精度等級 第1部:歯車の歯面に関する誤差の定義及び許容値
JIS B 1702-2: 1998 円筒歯車−精度等級 第2部:両歯面かみ合い誤差及び歯溝の振れの定義並びに精度許容値
JIS B 1704: 2010 かさ歯車の精度
JIS B 1705: 2013 かさ歯車のバックラッシ
JIS B 1706-1: 1999 すぐばかさ歯車−第1部:基準ラック
JIS B 1706-2: 1999 すぐばかさ歯車−第2部:モジュール及びダイヤメトラルピッチ
JIS B 1723: 2014 円筒ウオームギヤの寸法
JIS B 1751:1976 検査用親円筒歯車
JIS B 1753: 1999 歯車装置の受入検査−歯車装置から放射される空気伝ぱ音のパワーレベルの決定
JIS B 1754: 1998 歯車装置の受入検査−第2部:歯車装置の機械振動の測定方法及び振動等級の決定
JIS B 1755: 1999 平歯車及びはすば歯車の負荷容量計算方法
JIS B 1756: 2008 歯車−研削後の表面焼戻しエッチング検査法
JIS B 1757-1: 2012 歯車測定機の評価方法−第1部:歯車形の基準器を用いる方法
JIS B 1757-2: 2010 歯車測定機の評価方法−第2部:球基準器又は円筒基準器を用いた歯形測定
JIS B 1757-3: 2013 歯車測定機の評価方法-第3部:平面基準器を用いた歯すじ測定
JIS B 1757-4: 2013 歯車測定機の評価方法-第4部:球基準器を用いたピッチ測定
JIS B 1758:2013 歯車測定機の受入検査
JIS B 1759: 2013 プラスチック円筒歯車の曲げ強さ評価方法
JIS B 4350: 1991 歯切工具−歯形及び寸法   
JIS B 4351: 1985 すぐば傘歯車用G形刃物
JIS B 4354: 1998 歯車用ホブ−第1部:むくホブの形状寸法
JIS B 4355: 1998 歯車用ホブ−第2部:歯車用ホブの精度
JIS B 4356: 1996 ピニオンカッタ
JIS B 4357: 1988 丸形シェービングカッタ

歯車関係ISO規格

ご購入・お問い合わせ先:(一財)日本規格協会

規格No. 名   称
ISO 53:1998 Cylindrical gears for general and heavy engineering – Standard basic rack tooth profile 
ISO 54:1996  Cylindrical gears for general engineering and for heavy engineering – Modules
ISO 677:1976 Straight bevel gears for general engineering and heavy engineering – Basic rack
ISO 678:1976  Straight bevel gears for general engineering and heavy engineering – Modules and diametral pitches
ISO 701:1998 International gear notation – Symbols for geometrical data
ISO 1122-1:1998 Vocabulary of gear terms - Part 1: Definitions related to geometry
ISO 1122-1:1998/Cor 1:1999
ISO 1122-2:1999 Vocabulary of gear terms - Part 2: Definitions related to worm gear geometry
ISO 1328-1:1995 Cylindrical gears – ISO system of accuracy – Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
ISO 1328-2:1997 Cylindrical gears – ISO system of accuracy – Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information 
ISO 1340:1976 Cylindrical gears – Information to be given to the manufacture by the purchaser in order to obtain the gear required
ISO 1341:1976 Straight bevel gears – Information to be given to the manufacturer by the purchaser in order to obtain the gear required
ISO 2490:2007  Single-start solid (monobloc) gear hobs with tenon drive or axial keyway,1 to 40 module – Nominal dimensions
ISO 4468:2009 Gear hobs -Single-start- Accuracy requirements
ISO 6336-1:2006 Calculation of load capacity of spur and helical gears -  Part 1: Basic principles, Introduction and general influence factors
ISO 6336-1:2006/Cor 1:2008
ISO 6336-2:2006 Calculation of load capacity of spur and helical gears -  Part 2: Calculation of surface durability (pitting).
ISO 6336-2:2006/Cor 1:2008
ISO 6336-3:2006  Calculation of load capacity of spur and helical gears -  Part 3: Calculation of tooth bending strength
ISO 6336-3:2006/Cor 1:2008 
ISO 6336-5:2003  Calculation of load capacity of spur and helical gears -  Part 5: Strength and quality of materials
ISO 6336-6:2006  Calculation of load capacity of spur and helical gears -  Part 6: Calculation of service life under variable load
ISO 6336-6:2006/Cor 1:2007 
ISO 8579-1:2002   Acceptance code for gears – Part 1: Test code for airborne sound 
ISO 8579-2:1993  Acceptance code for gears - Part 2: Determination of mechanical vibrations of gear units during acceptance testing
ISO 9083:2001  Calculation of load capacity of spur and helical gears – Application to marine gears
ISO 9085:2002  Calculation of load capacity of spur and helical gears – Application for industrial gears
ISO/TR 10064-1:1992 Code of inspection practice – Part 1: Inspection of corresponding flanks of gear teeth
ISO/TR 10064-1:1992/Cor 1:2006
ISO/TR 10064-2:1996 Code of inspection practice-Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
ISO/TR 10064-2:1996/Cor 1:2001
ISO/TR 10064-2:1996/Cor 2:2006
ISO/TR 10064-3:1996 Code of inspection practice-Part 3: Recommendations relative to gear blanks, shaft center distance and parallelism of axes
ISO/TR 10064-3:1996/Cor 1:2006
ISO/TR 10064-4:1998 Code of inspection practice – Part 4: Recommendations relative to surface texture and tooth contact pattern checking
ISO/TR 10064-5:2005 Code of inspection practice – Part 5: Recommendations relative to evaluation of gear measuring instruments
ISO/TR 10064-5:2005/Cor 1:2006
ISO/TR 10064-6:2009 Code of inspection practice – Part 6: Bevel gear measurement methods
ISO 10300-1:2001 Calculation of load capacity of bevel gears – Part 1: Introduction and general influence factors
ISO 10300-2:2001 Calculation of load capacity of bevel gears – Part 2: Calculation of surface durability (pitting)
ISO 10300-3:2001 Calculation of load capacity of bevel gears – Part 3: Calculation of tooth root strength
ISO 10825:1995 Gears – Wear and damage to gear teeth – Terminology
ISO/TR 10828:1997 Worm gears – Geometry of worm profiles
ISO/TR 10828:1997/Cor 1:1998
ISO/TR 13593:1999   Enclosed gear drives for industrial applications
ISO/TR 13593:1999/Cor 1:2005  
ISO 13691:2001 Petroleum and natural gas industries – High-speed special-purpose gear units
ISO/TR 13989-1:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears – Part 1: Flash temperature method
ISO/TR 13989-2:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears – Part 2: Integral temperature method
ISO 14104:1995 Gears – Surface temper etch inspection after grinding
ISO/TR 14179-1:2001 Gears – Thermal capacity – Part 1: Rating gear drives with thermal equilibrium at 95℃ sump temperature
ISO/TR 14179-2:2001 Gears – Thermal capacity – Part 2: Thermal load-carrying capacity
ISO 14635-1:2000 Gears – FZG test procedures – Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
ISO 14635-2:2004 Gears – FZG test procedures – Part 2: FZG step load test A10/16,6R/120 for relative scuffing load-carrying capacity of high EP oils
ISO 14635-3:2005 Gears – FZG test procedures – Part 3: FZG test methods A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
ISO 17485:2006 Bevel gears – ISO system of accuracy
ISO 18653:2003 Gears – Evaluation of instruments for the measurement of gears
ISO/TR 18792:2008 Lubrication of industrial gear drives
ISO 21771:2007 Gears – Cylindrical involute gears and gear pairs – Concepts and geometry
ISO 23509:2006 Bevel and hypoid gear geometry
ISO 81400-4:2005 Wind turbines – Part4: Design and specification of gearboxes
ISO 81400-4:2005/Cor 1:2005