Standards・Publications
Publications
| Year | Books Title | Price Yen | Price Yen for JGMA members |
|---|---|---|---|
| 2008 5th edition | The gear standard collection | 8,000 | 5,600 |
| 2010 3rd Edition | The new gear handbook | 10,000 | 7,000 |
| 1991 | Half a century of gear technology | 5,000 | 3,500 |
| 2000 | Dry cut by a hob Research about a development study for the environmental response type gear processing technology | 8,000 | 5,600 |
| 2001 | Dry cut Research about a development study for the environmental response type gear processing technology | 8,000 | 5,600 |
*Japanese version only
Index of JGMA Standards by Number
【JGMA Standards written in Japanese】
Excl.Tax: For Nonmembers For Members
Nomark: Jpy5,000 Jpy3,500
*Mark Jpy2,000 Jpy1,400
**Mark Jpy7,000 Jpy4,900
| Number | Year | Title |
|---|---|---|
| JGMA 001-01 | 1986 | Abbreviations in gear terminology |
| JGMA 111-03A(*) | 1984 | Diameter Tolerances and Cylindricities on Bore and Shaft and Diameter Tolerances on Tip Cylinder for Spur and Helical Gears |
| JGMA 113-02A(*) | 1985 | Center Distance Tolerances for Fine-Pitch Spur and Helical Gears |
| JGMA 114-02 | 1983 | Parallelism of the axes for spur and helical gears |
| JGMA 114-02A | 1985 | Parallelism of the axes for fine-pitch spur and helical gears |
| JGMA 151-01 | 1973 | Geometry of cast gears and welding frame gears |
| JGMA 405-01 | 1978 | Calculation of Strength for cylindrical worm gear |
| JGMA 511-01 | 1986 | Cylindrical gears – Information to be given to the manufacturer by the purchaser in order to obtain the gear required |
| JGMA 521-01(*) | 1986 | Straight bevelg gears-information to be given to the manufacturer by the purchaser in order to obtain the gear required |
| JGMA 611-01 | 1987 | Addendum Modification of the Teeth of cylindrical gears |
| JGMA 1001-01 | 1999 | Reference value of gear tooth surface roughness and measuring method |
| JGMA 1002-01 | 2003 | Tooth contact pattern of gears |
| JGMA 1101-01 | 2000 | Centre distance deviation for spur and helical gears |
| JGMA 1102-01 | 2000 | Parallelism of axes for spur and helical gears(In conformity and ISO) |
| JGMA 1103-01 | 2003 | Gear accuracy – Backlash and Tooth thickness for spur and helical gears |
| JGMA 1104-01 | 2010 | Master Cylindrical Gears |
| JGMA 2001-01 | 1993 | Characteristics and accuracy of gear units for motion control |
| JGMA 3001-01 | 1998 | Standard of deburring and nicks proof |
| JGMA 3101-01 | 1996 | Estimation of cutting times for cylindrical gears |
| JGMA 3102-01 | 1997 | Estimation of tooth surface finishing time for cylindrical gears |
| JGMA 4101-01 | 1994 | Testing Method for load – capacity of cylindrical Gears |
| JGMA 4102-01 | 1995 | Criteria and evaluation procedures for load-capacity test results of cylindrical gears |
| JGMA 4301-01 | 2017 | Calculation of Load Capacity for Worm Gears |
| JGMA 6101-02(**) | 2007 | Calculation of Bending Strength for Spur and helical gears |
| JGMA 6102-02(**) | 2009 | Calculation of Surface Durability(Pitting Resistance) for Spur and Helical gears |
| JGMA 6201-01(**) | 2012 | Calculation of Bending Strength for Bevel Gears |
| JGMA 6202-01(**) | 2013 | Calculation of Surface Durability(Pitting Resistance)for Bevel Bevel Gear |
| JGMA 8002-01 | 1991 | Information for testing of gear units :Determination of Gear unit Mechanical Vibration |
| JGMA/TR0001 | 2000 | Comparative tables for gear accuracies of the new and old JIS |
| JGMA/TR0002 | 2000 | Simplified calculation of load capacity of spur and helical gears |
| JGMA/TR0003 | 2001 | Simplified calculation of load capacity of bevel gears |
Index of JIS (Japanese Industrial Standards) by Number
How to purchase: Ask for Japanese Standards Association
【Index of JIS】
| Number | Title |
|---|---|
| JIS B 0003:2012 | Drawing office practice for gears |
| JIS B 0102:1999 | Vocabulary of gear terms – definitions related to geometry |
| JIS B 0121:2012 | International gear notation – symbols for geometrical data |
| JIS B 0160:1999 | Gears-wear and damage to gear teeth – terminology |
| JIS B 0174:1991 | Gear cutters – vocabulary |
| JIS B 1453:1988 | Geared type shaft couplings |
| JIS B 1701-1:2012 | Cylindrical gears for general and heavy engineering -Part 1: Standard basic rack tooth profile |
| JIS B 1701-2:1999 | Cylindrical gears for general engineering and for heavy engineering -Part 2:Modules |
| JIS B 1702-1:1998 | Cylindrical gears – ISO system of accuracy -Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth |
| JIS B 1702-2:1998 | Cylindrical gears – ISO system of accuracy -Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
| JIS B 1704:2010 | Accuracy for bevel gears |
| JIS B 1705:1973 | Backlashes for bevel gears |
| JIS B 1706-1:1999 | Straight bevel gear for general engineering – Part 1:Basic rack |
| JIS B 1706-2:1999 | Straight bevel gear for general engineering and heavy engineering -Part 2:Modules and diametral pitches |
| JIS B 1723:1977 | Dimensions of cylindrical worm gears |
| JIS B 1751:1976 | Master cylindrical gears |
| JIS B 1753:1999 | Acceptance code for gears – Determination of airborne sound power levels emitted gear units |
| JIS B 1754:1998 | Acceptance code for gears – Part 2: Determination of mechanical vibrations of gear units during acceptance testing |
| JIS B 1755:1999 | Calculation of load capacity of spur and helical gears – Strength and quality of materials |
| JIS B 1756:2008 | Gears – Surface temperature etch inspection after grinding |
| JIS B 1757-1:2012 | Evaluation of instruments for the measurement of individual gears-Part1:Method by gear shape |
| JIS B 1757-2:2010 | Evaluation of instruments for the measurement of individual gears-Part2:Tooth form measurement |
| JIS B 4350:1991 | Gear cutter – Tooth profiles and dimensions |
| JIS B 4351:1985 | Straight bevel gear generating cutters (type G) |
| JIS B 4354:1998 | Gear hobs – Part1 : Dimensions of solid hobs |
| JIS B 4355:1998 | Gear hobs – Part2 : Accuracy requirements |
| JIS B 4356:1996 | Pinion type cutters |
| JIS B 4357:1988 | Rotary gear shaving cutters |
【TR(Technical Report)】
| Number | Title |
| TRB 0005:1999 | Cylindrical gears – Code of inspection practice – Inspection of corresponding flanks of gear teeth |
| TRB 0006:1999 | Cylindrical gears – Code of inspection practice – Inspection related to radial composite deviations, runout, tooth thickness and backlash |
Index of ISO standards
How to purchase: Ask for Japanese Standards Association
| Number | Title |
|---|---|
| ISO 53:1998 | Cylindrical gears for general and heavy engineering – Standard basic rack tooth profile |
| ISO 54:1996 | Cylindrical gears for general engineering and for heavy engineering – Modules |
| ISO 677:1976 | Straight bevel gears for general engineering and heavy engineering – Basic rack |
| ISO 678:1976 | Straight bevel gears for general engineering and heavy engineering – |
| Modules and diametral pitches | |
| ISO 701:1998 | International gear notation – Symbols for geometrical data |
| ISO 1122-1:1998 | Vocabulary of gear terms - Part 1: Definitions related to geometry |
| ISO 1122-1:1998/Cor 1:1999 | |
| ISO 1122-2:1999 | Vocabulary of gear terms – Part 2: Definitions related to worm gear geometry |
| ISO 1328-1:1995 | Cylindrical gears – ISO system of accuracy – Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth |
| ISO 1328-2:1997 | Cylindrical gears – ISO system of accuracy – Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
| ISO 1340:1976 | Cylindrical gears — Information to be given to the manufacturer by the purchaser in order to obtain the gear required |
| ISO 1341:1976 | Straight bevel gears – Information to be given to the manufacturer by the purchaser in order to obtain the gear required |
| ISO 2490:2007 | Solid (mono block) gear hobs with tenon drive or axial keyway, 0,5 to 40 module – Nominal dimensions |
| ISO 4468:2009 | Gear hobs – Accuracy requirements |
| ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears – Part 1: Basic principles, introduction and general influence factors |
| ISO 6336-1:2006/Cor 1:2008 | |
| ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears – Part 2: Calculation of surface durability (pitting) |
| ISO 6336-2:2006/Cor 1:2008 | |
| ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears – Part 3: Calculation of tooth bending strength |
| ISO 6336-3:2006/Cor1:2008 | |
| ISO 6336-5:2003 | Calculation of load capacity of spur and helical gears – Part 5: strength and quality of materials |
| ISO 6336-6:2006 | Calculation of load capacity of spur and helical gears – Part 3: Calculation of service life under variable load |
| ISO 6336-6:2006/Cor 1:2007 | |
| ISO 8579-1:2002 | Acceptance code for gears units – Part 1: Test code of airborne sound |
| ISO 8579-2:1993 | Acceptance code for gears – Part 2: Determination of mechanical vibrations of gear units during acceptance testing |
| ISO 9083:2001 | Calculation of load capacity of spur and helical gears – Application to marine gears |
| ISO 9085:2002 | Calculation of load capacity of spur and helical gears – Application for industrial gears |
| ISO/TR 10064-1:1992 | Code of inspection practice – Part 1: Inspection of corresponding flanks of gear teeth |
| ISO/TR 10064-1:1992/Cor 1:2006 | |
| ISO/TR 10064-2:1996 | Code of inspection practice – Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| ISO/TR 10064-2:1996/Cor 1:2001 | |
| ISO/TR 10064-2:1996/Cor 2:2006 | |
| ISO/TR 10064-3:1996 | Code of inspection practice – Part 3: Recommendations relative to gear blanks, shaft center distance and parallelism of axes |
| ISO/TR 10064-3:1996/Cor 1:2006 | |
| ISO/TR 10064-4:1998 | Code of inspection practice – Part 4: Recommendations relative to surface texture and tooth contact pattern checking |
| ISO/TR 10064-4:1998/Cor 1:2006 | |
| ISO/TR 10064-5:2005 | Code of inspection practice – Part 5: Recommendations relative to evaluation of gear measuring instruments |
| ISO/TR 10064-5:2005/Cor 1:2006 | |
| ISO/TR 10064-6:2009 | Code of inspection practice – Part 6: Bevel gear measurement methods |
| ISO 10300-1:2001 | Calculation of load capacity of bevel gears – Part 1: Introduction and general influence factors |
| ISO 10300-2:2001 | Calculation of load capacity of bevel gears – Part 2: Calculation of surface durability (pitting) |
| ISO 10300-3:2001 | Calculation of load capacity of bevel gears – Part 3: Calculation of tooth root strength |
| ISO 10825:1995 | Gears – Wear and damage to gear teeth – Terminology |
| ISO/TR 10828:1997 | Worm gears – Geometry of worm profiles |
| ISO/TR 10828:1997/Cor 1:1998 | |
| ISO/TR 13593:1999 | Enclosed gear drives for industrial applications |
| ISO/TR 13593:1999/Cor 1:2005 | |
| ISO 13691:2001 | Petroleum and natural gas industries – High-speed special-purpose gear units |
| ISO/TR 13989-1:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears – Part 1: Flash temperature method |
| ISO/TR 13989-2:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears – Part 2: Integral temperature method |
| ISO 14104:1995 | Gears – Surface temper etch inspection after grinding |
| ISO/TR 14179-1:2001 | Gears – Thermal capacity – Part 1: Rating gear drives with thermal equilibrium at 95oC sump temperature |
| ISO/TR 14179-2:2001 | Gears – Thermal capacity Part 2: Thermal load-carrying capacity |
| ISO 14635-1:2000 | Gears – FZG test procedures – Part 1: FZG test method A/8, 3/90 for relative scuffing load-carrying capacityof oils |
| ISO 14635-2:2004 | Gears – FZG test procedures – Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils |
| ISO 14635-3:2005 | Gears – FZG test procedures – Part 3: FZG test methods A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
| ISO 17485:2006 | Bevel gears – ISO system of accuracy |
| ISO 18653:2003 | Gears – Evaluation of instruments for the measurement of individual gears |
| ISO/TR 18792:2008 | Lubrication of industrial gear drives |
| ISO 21771:2007 | Gears – Cylindrical involute gears and gear pairs – Concepts and geometry |
| ISO 23509:2006 | Bevel and hypoid gear geometry |
| ISO 81400-4:2005 | Wind turbines – Part 4: Design and specification of gearboxes |
| ISO 81400-4:2005/Cor 1:2005 | |
How to purchase publications and standards.
Please click “Contact” so that you can
approach to an orderring form.